Advertisement
Quick Links
Copyright Notice
Copyright 2001 Gigabyte Technology.
All Rights Reserved. No part of this documentation, including but not limited to the products
and software described in it, may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language, in any form or by any means without the
express written permission of Gigabyte Technology.
Trademarks
Products and corporate names appearing in this manual may be registered trademarks or
copyrights of their respective companies and are used only for identification or explanation
purposes without intent to infringe.
Other product names used in this manual may be trademarks or registered trademarks of
their respective owners.
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information contained
herein. Third-party brands and names are the property of their respective owners.
Disclaimer
The information contained in this documentation is subject to change without notice.
Gigabyte Technology makes no representations or warranties of any kind, either express
or implied, with respect to the contents hereof, including but not limited to implied
warranties of merchantability or fitness for a particular purpose. In no event shall
Gigabyte Technology. Be liable for any loss of profits, loss of business, loss of data,
interruption of business, or indirect, special, incidental, or consequential damages of any
kind arising from the use of this product or documentation. Gigabyte Technology reserves
the right to revise or change this product or documentation at any time without obligation
of Gigabyte Technology. To notify any person of such revision or changes.
TM
G-MAX
ATX Series User's Manual
P. E1
Dec/2002
Advertisement
Related Manuals for Gigabyte G-MAX XA3CB
Summary of Contents for Gigabyte G-MAX XA3CB
- Page 1 In no event shall Gigabyte Technology. Be liable for any loss of profits, loss of business, loss of data, interruption of business, or indirect, special, incidental, or consequential damages of any kind arising from the use of this product or documentation.
- Page 2 Introduction G-MAX series product, to adopt main board of design & development by GIGABYTE that is ATX mechanical design in advance, let you work smoothly in Windows environment. ATX adopts dexterous mechanical design, so it is ease by assembly & safeguard.
- Page 3 Items included in the package Software and Manuals Cables Mouse (Optional) Power Cord G-MAX ATX Series User’s Manual P. E3 Keyboard (Optional)
- Page 4 I. Chassis Dimension 460(D)mm x 186(W)mm x 430(H)mm This chassis is made with material complied with UL specification and designed for space saving and easy open with thumbscrew. There are three 5.25” and six 3.5” drive bays. This chassis complies with corresponding EMC and safety regulations. II.
- Page 5 1. Insert the CPU on the CPU socket. Before installation, lift up the lever and align the cut of the CPU with the marking on the socket. 2. Pull down the lever to lock the CPU on the socket after installation. When you are installing the heat sink, please make sure to keep the heat sink tight against the CPU to obtain the best cooling result.
- Page 6 Install fan on top of Set CPU clock frequency from BIOS Setup, see Motherboard Manual for details. Memory Notches at sides Position notches. Make sure that the notches should align the pin on memory slot on the motherboard Notches at sides Position notches.
- Page 7 In this section we will guide you to install memory module. First, make sure the position notches at the bottom of the module should align to the pins on the module sockets on the motherboard, then push the module downward until the locks hook up notches at sides.
- Page 8 G-MAX ATX Series User’s Manual 3.Connect the IDE cable included in the accessory box to the connector on the hard drive. Make sure that the RED wire on the ribbon connects to PIN 1 of the hard drive. Connect to hard drive 4.Connect power connector to the hard drive.
- Page 9 6.Connect the other end of the IDE connector to the IDE-1 bus on the motherboard. 7.Check all connections again. Put back side panel G-MAX ATX Series User’s Manual Put back front panel P. E9...
- Page 10 V.System Installation and User’s Guide Front Panel CD ROM Tray CD-ROM Button Floppy Power LED Floppy LED Power Button Floppy HDD LED Button Rear Panel Power Inlet Voltage Switch Power Switch Keyboard Port (PS/2) COM Port *VGA/COM Port Audio Out Audio In MIC In USB Port...
- Page 11 2.Specification with “ ” mark are subject to change without notice. 3.For latest drivers update, please visit our Web site listed below: http://www.gigabyte.com.tw/products/plat_index.htm Important Safety Instructions Caution –To reduce the risk of fire, use only No.26 AWG or larger telephone line cord.
- Page 12 G-MAX ATX Series User’s Manual ▓User’s Guide for SPDIF (For those models with SPDIF only) 1. Insert the Driver CD that was included in accessory box into your CD-ROM. Install or upgrade the audio driver. 2. If SPDIF can’t output normally after audio driver is updated, please operate step by step as below.
- Page 13 G-MAX ATX Series User’s Manual Select Enable Select (B)Volume Control Options Advanced Controls Select Properties Playback SPDIF P. E13...
- Page 14 G-MAX ATX Series User’s Manual Enable (C)Select SPDIF Advanced Sampling rate conversion for SPDIF output Close Finish ® Similar procedures will be applied to different Windows operating systems to enable the SPDIF function. P. E14...
- Page 15 G-MAX ATX Series User’s Manual ▓User’s Guide for Digital CD audio 1. Insert the Driver CD that was included in accessory box into your CD-ROM. Install or upgrade the audio driver. 2. If the digital CD audio can’t output normally after audio driver is updated, please operate step by step as below.
- Page 16 G-MAX ATX Series User’s Manual (C) Select Hardware Device Manager P. E16...
- Page 17 G-MAX ATX Series User’s Manual (D) Select DVD/CD-ROM drivers Properties (E) Select ”Enable digital CD audio for this CD-ROM device” P. E17...
- Page 18 G-MAX ATX Series User’s Manual (F) Select “YES” ® 3. The “Enable digital CD audio for this CD-ROM device” option in Windows ME and ® Windows XP is default set to “Enable”. ® 4. Similar procedures will be applied to different Windows operating systems to enable the digital CD audio function.