Advertisement
In this section we will guide you to install memory module. First, make sure the position
notches at the bottom of the module should align to the pins on the module sockets on
the motherboard, then push the module downward until the locks hook up notches at
sides.
Locks: make sure they hook up the notches at sides of module
Hard Drive Installation
1.Remove 4 screws in front of the hard drive chassis and dismount chassis.
HDD frame
2.The chassis accommodates up to six 3.5" storage devices. Select a place and fix the
hard drive with screws.
G-MAX
Press down splinter then pull
out HDD frame.
3.5" floppy Drive
HDD Drive
HDD frame
P. E7
TM
ATX Series User's Manual
Advertisement
