Gigabyte G-MAX XA3CB User Manual page 5

CPU
1. Insert the CPU on the CPU socket. Before installation, lift up the lever and align the
cut of the CPU with the marking on the socket.
2. Pull down the lever to lock the CPU on the socket after installation. When you are
installing the heat sink, please make sure to keep the heat sink tight against the
CPU to obtain the best cooling result.
3. Apply the thermal compound to one side of the template, and ensure the compound
is spread evenly across the template and repeat if necessary.
4. Connect fan power connector to the CPU FAN connector on the motherboard.
 
A. For Intel Pentium 4 processors
CPU Pin
Apply thermal grease to the top
of the CPU properly.
TM
B. For AMD Athlon and AMD Duron
CPU Pin
Apply thermal grease to the top
of the CPU properly.
TM
G-MAX
Lever
Click the heat sink
locker to the
motherboard
retention module.
Install fan on top of CPU
TM
processors
P. E5
ATX Series User's Manual
Lever