Listening To The Radio - Sony LBT-V4800R Operating Instructions Manual

Table of Contents

Advertisement

Listening to the radio

— Preset Tuning
Before using this function, preset radio
stations in the tuner's memory (see "Step
3: Presetting radio stations").
STEREO/MONO
VOLUME
POWER
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
FM ˜ AM
3
2
1
POWER
TUNER/
BAND
≠/±
VOL +/–
2
Press TUNING MODE repeatedly
until "PRESET" appears in the
display.
MANUAL n AUTO n PRESET
3
Press TUNING +/– (or ≠/±
on the remote) to tune in the desired
preset station.
Preset number
DOLBY NR
OFF
ALL DISC S
To
Do this
Turn off the radio
Press POWER.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until "MANUAL" appears, then press
TUNING +/– to tune in the desired station.
Tips
• Pressing TUNER/BAND while the system is off
automatically turns on the system and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• If an FM program is noisy, press STEREO/
MONO so "MONO" appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
TUNED
STEREO
PRESET
MHz
Frequency
15

Advertisement

Table of Contents
loading

Table of Contents