Table of Contents
Advertisement
Recording CDs by
specifying the track
order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
This function cannot be used during menu
playback of VIDEO CDs with PBC functions
(Ver 2.0).
12 2 1113
9
1
38
3
p
5
6
4,7
EDIT
CHECK
1
Place CDs and close the front cover.
2
Insert a blank tape into deck B.
3
Press FUNCTION repeatedly until
"CD" appears in the display.
4
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
5
Press DISC SKIP to select a CD.
6
Turn the jog dial until the desired
p
track appears in the display.
Disc number
DISC
PROGRAM
7
Press PLAY MODE once.
The track is programmed. "STEP" and
the programmed playing order appear,
followed by the total playing time.
DISC
PROGRAM
8
Repeat steps 5 through 7 to program
additional tracks to be recorded on
side A.
Skip step 5 to select tracks from the same
disc.
Track number
DOLBY NR
OFF
Total playing time
(including selected track)
The last programmed track
DOLBY NR
OFF
Total playing time
Advertisement
Table of Contents
