Download Print this page

Gigabyte G-MAX TA1 User Manual

Gigabyte g-max ta1: user guide
Hide thumbs Also See for G-MAX TA1:

Advertisement

Quick Links

For Users in the USA
This
a Class B digital device, pursuant to Part 15 of FCC Rules. These rules
are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used in accordance witch the installation., May cause
harmful interference to radio communications.
However
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference
by one or more of the following measures:
* Reorient the receiving antenna
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Notes:
Unauthorized changes or modifications may void the user's right to operate the
equipment.
Only equipment certified to comply with Class B (computer input/output devices,
terminals, printers, etc.) should be attached to this equipment and all such
equipment must be connected with shielded interface cables.
FCC
equipment has been tested and found to comply with the limits for
, there is no guarantee that interference will not occur in a
COMPLICANCE STATEMENT

Advertisement

loading

Summary of Contents for Gigabyte G-MAX TA1

  • Page 1 For Users in the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These rules are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a residential installation.
  • Page 2 ¡½ ¡½ ¡½ TA series has been equipped with the motherboards developed by Gigabyte Technol- ogy to ensure the best performance under Windows environment. Rack-mounted case design provides easy assembly and maintenance, and makes system upgrade a piece of cake! Improper battery installation may cause explosion.
  • Page 3 ¡½ ¡½ Specifications ¡½ ¡½ ¡½ -Product specification -PC case -TA series Motherboard -Power supply unit -24X Slim CD-ROM or DVD-Rom (Optional) -PCMICA Slot (optional) -2.5-inch Slim HDD (Optional) -Power cord -Keyboard and mouse (Optional and subject to real products at shipment) -Accessories System Assembly Manual Driver CD...
  • Page 4 User’s Manual 1.PC case Overall dimension With side cover: 70(W)mm x 236(H)mm x 213(D)mm Without side cover: 64(W)mmx230(H)mmx213(D)mm Materials of the case has been tested to comply with the UL specification and designed for screw saving purposes. Users simply need to remove one screw from the back to unload the case cover and access to the inside of the case.
  • Page 5 3. System equipment installation ¡½ ¡½ ¡½ Unload case ¡½ ¡½ Step 1: Remove the screw from the bottom of the case. Step 2: Grasp the handle on the panel and pull out the case. ¡½ ¡½ ¡½ Installing hard drive ¡½...
  • Page 6 User’s Manual Step 2: Fix the hard drive with its rack on the four posts and connect the ribbon cable to the IDE connector (J1). ¡½ ¡½ ¡½ Installing DOM (DISK On Module) ¡½ ¡½ Step 1: Install DOM on the DOM slot (J1). Attention! Make sure that DOM and HDD cannot be used at the same time.
  • Page 7 ¡½ ¡½ Installing CD-ROM ¡½ ¡½ ¡½ Step 1: Fix the slim CD-ROM on the base with 4 screws (2 on each side). Step 2: Slide slim CD-ROM and the base to the rack (J4). Step 3: Fix the CD-ROM and the base on the rack with 2 screws. User’s Manual English...
  • Page 8 User’s Manual ¡½ ¡½ Installing PCMCIA ¡½ ¡½ ¡½ Step 1: Fix PCMCIA card next to chassis with screws. Step 2: Unload the part from another side of the PC. Then fix the PCMCIA card on the bolts and Fix the PCMCIA Card with screws. English ( C3 Type) ( P4 Type)
  • Page 9 1. Please use high quality CDR or CDRW to prevent disks from breaking when running at high speed. 2. Specification of hardware is subject to change without notice. 3. Please visit our site at http://www.gigabyte.com.tw/ to download the latest version of drivers. ¡½...

This manual is also suitable for:

G-max ta3Ta series