Replacing The Pen Tip - Fujitsu Stylistic ST6010 User Manual

Figure 10. Installing a Pen Tether

Replacing the Pen Tip

With use, the pen tip may become worn or may pick up foreign particles
that can scratch the screen. A damaged or worn tip may not move freely,
causing unpredictable results when using the pen. If your pen exhibits
these problems, you should replace the pen tip. To do so, use the pen tip
removal tool included with your pen.
To remove the tip, position the tip in the gap between the two ends of
the tool. Pinch the tool together so the tip is firmly clasped, then pull it
from the barrel. If the tip is worn or damaged, discard it.
Figure 11. Tip Removal Tool
To replace the tip, retrieve one of the new tips that accompanied your
pen. Insert the flat end of the tip into the barrel and push it in firmly until
it is seated.
If you need more tips, they can be ordered from the Fujitsu website at:
us.fujitsu.com/computers.
65 - Using the Pen