Fujitsu Stylistic ST6010 User Manual page 39

Setting Passwords
When shipped from the factory, no passwords are set. You have a choice of having no password or setting
a supervisor and user password. You must set the supervisor password before the user password.
•
T
HE PURPOSE OF SUPERVISOR PASSWORD IS TO BE ABLE TO BYPASS THE USER PASSWORD IN CASE
THE USER PASSWORD IS FORGOTTEN
SYSTEM
•
Y
OU MUST SET THE SUPERVISOR AND USER PASSWORDS FOR THE SECURITY PANEL TO WORK
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can
bypass the user password.
1
Go to the Start menu.
2
Click on Run.
3
Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\ FJSECS.EXE, then press [Enter]
4
Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1
Go to the Start menu.
2
Click on All Programs.
3
Click on Security Panel Application -> Security Panel Application.
4
Follow the on-screen instructions to set the user password
Y
OU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE
.
.
38 - Application, Navigation, and Security Buttons
. T
HE SUPERVISOR PASSWORD ALONE WILL NOT LOCK THE
.
.