D-Link DIR-1960 User Manual page 42

Section 4 - Configuration
Select Auto Configuration if your ISP assigns your IPv6 address when your
router requests one from the ISP's server. Some ISPs require you to adjust
settings on your side before your router can connect to the IPv6 Internet.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable prefix delegation services.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address:
Enter a valid LAN IPv6 address.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
D-Link DIR-1960 User Manual
Auto Configuration (SLAAC/DHCPv6)
38