Firewall Settings - D-Link DIR-1960 User Manual

Section 4 - Configuration
The router's firewall protects your network from malicious attacks over the
Internet. In the Features menu on the bar on the top of the page, click Firewall
Settings. Click Advanced Settings... to expand the list and see all of the
options.
Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes
the client to threats over the Internet, and is not recommended in
ordinary situations.
DMZ IP Address: If you enabled DMZ, enter the IP address of the client you wish to
expose, or use the drop-down menu to quickly select it.
Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber
attacks by validating that the traffic passing through the session
conforms to the protocol.
Enable Anti-Spoof Enable this feature to protect your network from certain kinds of
Checking: "spoofing" attacks.
IPv6 Simple Enable or disable IPv6 simple security.
Security:
IPv6 Ingress
Enable or disable IPv6 ingress filtering.
Filtering:
D-Link DIR-1960 User Manual

Firewall Settings

62