Table of Contents
Advertisement
TO VIEW THE SETTINGS MENU (CONTINUED)
7.
Push the Rotary Selector Knob and rotate the Rotary Selector Knob to scroll through the alphabet and numbers in
this field.
8.
Push the Rotary Selector Knob when the letter you want is displayed. Repeat this for each space until the password
is complete.
9.
When you are finished entering the password, turn the Rotary Selector Knob clockwise until the password box is
highlighted. Push the Rotary Selector Knob.
10. Turn the Rotary Selector Knob to Accept and push the Rotary Selector Knob.
11. After successfully entering the password, the Setting menu will now appear.
NOTE: To change the password, see TO CHANGE THE PASSWORD in this section of the manual.
NOTE: All changes to the settings of the Responder 2000 must be performed before connecting the Responder
2000 to the patient.
2026116-001 Revision B
Responder™ 2000
Page 84
Advertisement
Table of Contents
