B Efore Putting Into Use; W E Care For The Environment; Tips For Energy Savings - Summit FS60MSSVHFROST Instruction Manual

B efore Putting Into Use
Before connecting the beer froster to the power supply, leave it standing for about
24 hours. This will reduce the possibility of malfunctions in the cooling system
due to transport handling.
Clean the beer froster thoroughly; especially in the interior (See Cleaning and
Maintenance).
W e Care for the Environment
Our appliances are distributed in packaging made of environmental friendly
material which could safely be recycled, disposed of or destroyed without any
effects on the environment whatsoever.
Our instruction manuals are printed either on recycled paper or chlorine free
bleached paper.

Tips for Energy Savings

Once you open the door try to close it as soon as possible.
Every now and then check if the beer froster is sufficiently
with adequate space behind the unit.
The coils on the rear of the beer froster should be cleaned and free
of dust or any other impurities.
Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 1/8" thick.
Always consider instructions stated in sections Positioning and
Energy Saving Tips, otherwise the energy consumption is
substantially higher.
Instructions for Use
ventilated