Table of Contents
Advertisement
Model Numbers
Capacity
Electrical Input
Rated Current
Temperature of
Freezer
Refrigerant
Installation
Ship Weight
Unit Dimensions
(W x D x H)
NOTES: 1. This appliance is suitable for storing vaccines, pharmaceuticals and other
temperature-sensitive materials. It is not designed for the storage of
foodstuffs.
2. Specifications are subject to change without notice.
Before Using Your Appliance:
•
Remove the exterior and interior packing.
•
Before connecting the unit to a power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Remove the crisper, drip tray and shelves and clean them and the interior surfaces of
the unit with lukewarm water using a soft cloth.
Installing the Refrigerator/Freezer:
•
Place the unit on a floor that is strong enough to support the appliance when it is fully
loaded. To level the unit, adjust the two leveling legs at the front.
•
Models CT66J, CT66L and CT66B are designed to be free-standing only, and should
not be recessed or built in. When installing, allow at least 5 inches of space at the
sides and top of the unit and 2 inches at the rear, which will allow the proper air
circulation to cool the compressor and condenser.
•
Locate the unit away from direct sunlight and sources of heat (oven, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extremely cold ambient temperatures may also affect the
unit's performance.
Technical Information
CT66J (white with wire shelves and no lock)
CT66L (white with wire shelves and lock)
CT66B (black with glass shelves and no lock)
5.1 cu. ft.
115V AC/60Hz
1.3A
0°F
R134a, 2.6 oz.
Free-standing
102 lbs.
23.63" x 23.5" x 33.25"
Installation Instructions
4
Advertisement
Table of Contents
