Table of Contents
Advertisement
Model Numbers
Color
Capacity
Electrical Input
Rated Current
Refrigerant
Installation
Ship Weight
Unit Dimensions
(W x D x H)
NOTES: 1. This appliance is suitable for storing reagents, pharmaceuticals and other
temperature-sensitive materials. It can also store foodstuffs at an ideal
temperature, but because of its oversized commercial compressor, it is not
designed for household use.
2. Specifications are subject to change without notice.
Before Using Your Appliance:
Remove the exterior and interior packing.
Before connecting the unit to a power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Remove the shelves and clean them and the interior surfaces of the unit with
lukewarm water using a soft cloth.
Installing the Refrigerator/Freezer:
Place the unit on a floor that is strong enough to support the appliance when it is fully
loaded. To level the unit, adjust the two leveling legs at the front.
Models CP133 is designed to be free-standing only, and should not be recessed or
built in. When installing, allow at least 4 inches of space at the top, sides and rear of
the unit, which will allow the proper air circulation to cool the compressor and
condenser.
Locate the unit away from direct sunlight and sources of heat (oven, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extremely cold ambient temperatures may also affect the
unit's performance.
Avoid locating the unit in moist areas. Too much moisture in the air will cause frost to
form quickly on the evaporator, requiring more frequent defrosting of the freezer
compartment.
Technical Information
CP133
White
9.5 cu. ft.
115V AC/60Hz
1.9A
R134a, 4.9 oz.
Free-standing
145 lbs.
23.63" x 24.0" x 59.75"
Installation Instructions
4
Advertisement
Table of Contents
