Page 1
FF63BKBI Instruction Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS FELIX STORCH, INC. Write Model and Serial Numbers here: Summit Appliance Division ISO 9001:2015 registered Model _________________________ 770 Garrison Avenue Bronx, NY10474 Serial No. ______________________...
Important Safeguards Your safety and the safety of others are very important. Before the refrigerator is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following: Plug into a grounded 3-prong outlet.
Page 3
The appliance must be installed with all electrical connections in accordance with state and local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required. Do not kink or pinch the power supply cord of the appliance.
Table of Contents Important Safeguards ....................2 - 3 Location of Parts ........................ 4 Technical Information ......................5 Installation Instructions ....................6 - 8 Before Using Your Appliance ..................5 Installing the Refrigerator ....................5 Electrical Connection / Extension Cord ................6 Reversing the Door Swing / Door Handle Installation ............
Technical Information FF61WBI (white) Model Numbers FF63BKBI (black exterior) Capacity 5.5 cu. ft. Electrical Input 115V AC/60Hz Rated Current 1.4A Refrigerant R600a Unit Weight 86 lbs. Installation Built-in Unit Dimensions (W x D x H) 23.63" x 23.5" x 33.5"* *Models with the suffix ADA are sized at 32”...
Installation Instructions Before Using Your Appliance: Remove the exterior and interior packing. Before connecting the unit to a power source, let it stand for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Electrical Connection: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This unit should be properly grounded for your safety.
Reversing the Door Swing: NOTE: Models with professionally installed door handles are not user-reversible. If you find the direction of opening the door of the appliance inconvenient, you can change it. Holes on the opposite side have already been prepared at the factory. This appliance can be opened from either the right side or the left.
Operating Your Refrigerator Temperature Control: Your appliance’s evaporator system is out of sight behind the interior rear wall. The interior temperature is controlled with a thermostat knob located inside the unit, towards the upper right-hand corner. Turn the knob clockwise from the STOP (0) position toward the higher numbers for colder temperatures.
Care and Maintenance Cleaning Your Appliance: Unplug the appliance, turn the thermostat to STOP (0) and remove all contents, including shelves and crisper. Wash the inside surfaces with a solution of lukewarm water and vinegar. Wipe dry with a clean, soft cloth. Wash the shelves and crisper with a mild detergent solution, then rinse and dry thoroughly.
Page 11
Troubleshooting When using this appliance, you may come across some problems that in many cases result from improper handling and can easily be eliminated. TROUBLESHOOTING GUIDE The appliance fails to operate after being connected to the power source. Check whether the power supply is active and that the thermostat is not set to the STOP (0) position.
Limited Warranty ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory- specified parts and repair labor to correct defects in materials or workmanship.