Technical Information; Installation Instructions; Before Using Your Refrigerator; Installing The Refrigerator - Summit Appliance Accucold CM411L Owner's Manual

Refrigerators with ice compartment

Hide thumbs

Table Of Contents

Table of Contents

Electrical Rating:

Refrigerant:

Installation:

Unit Weight:

Unit Dimensions:

* For built-in models (-BI suffix), height can be adjusted from 33¼" to 34½"

* For models with suffix ADA, height is modified to 32" for use under lower counters

NOTE: THESE REFRIGERATORS ARE DESIGNED FOR MEDICAL OR PHARMACEUTICAL USE ONLY AND

ARE NOT INTENDED FOR USE AS HOUSEHOLD REFRIGERATORS.

Before Using Your Refrigerator:



Remove the exterior and interior packing.



Check to be sure you have all of the following parts:



1 drip tray



1 ice cube tray



2 wire shelves (models CM411L & CM411LBI)



2 glass shelves (models CM421BL & CM421BLBI)



1 crisper drawer with glass cover



1 handle with screws and handle seal



2 keys



Before connecting the unit to the power source, let it stand for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system from

handling during transportation.



Clean the interior surfaces with lukewarm water using a soft cloth.

Installing the Refrigerator:



Place your unit on a floor that is strong enough to support the unit when it is fully

loaded. To level your unit, adjust the leveling legs at the bottom.



Models CM411L and CM421BL are designed to be free-standing only, and should

not be recessed or built in. On the other hand, models CM411LBI and

CM421BLBI are specifically designed to be built in.



Models CM411L and CM421BL: When installing, allow 5 inches of space at the

back and sides of the unit, which will allow the proper air circulation to cool the

compressor and condenser.