Printing Messages Received Into Memory (Function 52) - Gestetner 9870 Operator's Manual

Printing messages Received
into Memory (Function 52)
If someone sends you a message us-
ing the Confidential Transmission
feature, instead of printing it out im-
mediately, the machine stores it in
memory. The Receive File indicator
on the operation panel blinks to in-
form you when a confidential mes-
sage has come in. To print out these
messages, follow the steps below.
Note
You need to know the Confidential
ID before you start this procedure.
A
Press {Function} {5} {2} then the
{Yes} key.
CONFID'L ID
kkkk
B
Enter the Confidential ID on the
ten key pad ( e.g. 1234).
CONFID'L ID
kkkk
Note
If no messages are stored in
memory for this Confidential
ID, the display will prompt you
for a Confidential ID again. In
this case, go to step D .
C
Press {Start} to print the fax mes-
sage.
CONFID'L ID
INVALID ID
Note
If more messages are stored for
this ID, repeat this step as many
times as necessary.
D
KPAD
START/N
START/N
Confidential Reception
To check for messages sent with
other Confidential ID codes, go to
step B . Alternatively, press the
{No} key then the {Function} key
to quit this function.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
3
39