Gestetner 9870 Operator's Manual page 24

Machine Layout
12.
{Energy Saver} key
Hold a few seconds this to start or end the
energy saver mode.
13. {Copy} key
Press this to copy the document now in
the feeder.
14. {Reception Mode} key
2
Press this to select the reception mode
(Tel, Auto, or Fax).
15.
{Function} key
Press the {Function} key and enter a two
digit code to access functions 11 to 52.
(For functions 61 to 95, enter 6, the access
code on see P.119 "Access Code For Func-
tions 61 To 95" and the function number.)
16.
{Stop} key
Press the {Stop} key to stop a transmis-
sion or a document scanning, to stop a re-
ception or to stop a long copy run. The
machine will finish printing out the sheet
being printed and then stop.
17. {Start} key
Press the {Start} key to start all tasks.
18.
Ten key pad
Use the ten key pad (sometimes called
the ten keys) to dial fax numbers, to enter
the numbers of copies, etc.
19.
{On Hook Dial} key
Press the {On Hook Dial} key to dial a
phone call from the keypad without hav-
ing to lift the phone or handset off the
hook (phone or handset option needed).
20. {Clear} key
Press the {Clear} key to erase the last
character or digit entered, or use the left
and right arrow keys to move the cursor
and then press Clear to erase whatever is
at the cursor.
10
21.
{Quick Dial} keys / {User Function}
keys.
There are 30 Quick Dial keys. Use them to
store individual fax numbers (see P.27
"Storing & Editing Fax Numbers (Functions
31 & 32)" ) or groups (see P.30 "Storing &
Editing A Group Of Fax Numbers (Function
33)" ). You can also use these keys to en-
ter characters (see P.128 "Entering Charac-
ters" ). In addition you can register Quick
Dial 29 as the Dial Option key (see P.33
"Programming The Dial Option Key". )You
can also use Quick Dial 30 as a Group key
(see P.32 "Programming The Group Key" ).
You can store combinations of settings
that you use on a frequently basis in the
two User Function keys ( F1,F2 ). When
you press a User function key, it lights to
show you that it is selected.