Clearing Misfeeds - Gestetner 3222 Copy Reference Manual

What to do If Something Goes Wrong
x Clearing Misfeeds
3
R CAUTION:
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
Important
When clearing misfeeds, do not turn off the power switch. If you do, your
copy settings are cleared.
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
If paper misfeeds occur repeatedly, contact your service representative.
Note
More than one misfed areas may be indicated. In this case, check every appli-
cable area. Refer to the following charts: A, B, C, D, R, P, Y, Z
You can find a sticker explaining how to remove misfed paper inside of the
front cover, upper side of the finisher.
When the machine instructs you to reset originals, reset your originals to the
feeding position. The display will indicate the number of originals you
should return.
98