Table of Contents
Advertisement
JOB EDITOR
Position of the title block unknown, i.e. there is
no optimized folding of the drawing
Title block in the top left-hand corner
Title block in the top right-hand corner
Title block in the bottom right-hand corner
Title block bottom left-hand corner
With this setting, you inform RW-470 PLOTBASE, on which side
the title block is located. The program then rotates the drawing
into the position required for the folder.
Attention: This setting refers to the original position of
the drawing in the preview window. The drawing can
be rotated to its original position by clicking on the
button shown below. As soon as the original position is
displayed, the symbol is deactivated:
• Rotate
Here you can say whether the drawing is to be rotated or not
during plotting. Rotations of 0°, 90°, 180° and 270° are possible.
When set to "Auto", RW-470 PLOTBASE rotates automatically if
this results in less waste paper
36
RW-470 CLIENTS
Advertisement
Table of Contents
