Presets; Setting The Ssl Defaults; General" Tab - Gestetner 27AO User Manual

Presets

Before you begin with the work in RW-470 PLOTCLIENT WIN,
you must first set a few presets as e.g. determine the SSL paths
or enter the SSL default values.

Setting the SSL defaults

Setting of the SSL default values is automatically called up fol-
lowing installation, in the very first program start. Enter which
values are to be the standard values for all SSL print jobs. Also,
after the first program start, these default values can be changed
whenever you wish. Simply open the job editor via the menu
item "settings - SSL default".
A detailed description of the possible settings is given in Chapter
"job editor" from Page 30.

"General" tab

The "General" tab is opened via the menu item "Settings - Op-
tions".
RW-470 PLOTCLIENT WIN takes the information on the directo-
ries, which you entered during installation and enters it in the
relevant fields:
PRESETS
RW-470 CLIENTS 25