Table of Contents
Advertisement
AdonisC2_ENcopy122F_FM.book Page 79 Thursday, February 15, 2001 3:23 PM
Directional Size Magnification (Inch)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1
2
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal
sizes of the original and those of the
copy, as shown in the illustration.
Limitation
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
However, with some ratios, parts
of the image might not be copied
or blank margins will appear on
copies.
Note
❒ You can enter sizes within the fol-
lowing ranges:
Metric
1 – 999mm (in 1mm steps)
version
Inch
0.1" – 99.9" (in 0.1" steps)
version
❒ The following ratios can be selected:
• Metric version: 25 – 400%
• Inch version: 25 – 400%
A
Press the [Reduce/Enlarge] key.
3
4
B
Press the [Specifid Ratio] key.
CP2M01EE
C
Press the [Dirc.Size Mag. In] key.
D
Enter the horizontal size of the
original with the number keys,
then press the [#] key.
Note
❒ To change the value entered,
press the [Clear] or {Clear/Stop}
key and enter the new value.
Directional Size Magnification (Inch)
2
79
Advertisement
Table of Contents
