Scan Size - Gestetner 1045 User Manual

Facsimile User Tools
F
Select the file you want to delete.
G
Press [Delete].
Note
❒ To cancel a file from deleting,
press [Do not Delete].
H
Press [Exit].
The initial display is shown.
Programing and Changing a

Scan Size

7
When you select a Scan Size to scan a
non-standard size original, two cus-
tom sizes of original are available
(Program Size 1 and Program Size 2).
Use these functions to program a cus-
tom size in advance.
To change an existing Scan size, just
use the same procedure to change a
Scan Size.
Important
❒ When programing or changing an
original size, we recommend that
you make a memo of the new size.
Note
❒ For the horizontal length, specify
from 128 to 1200mm or from 5.5 to
47inches.
116
A
Press the { { { { User Tools/Counter} } } } key.
B
Select [Facsimile Features].
The Fax User Tool menu is shown.
C
Check that the "Prog./Change/De-
lete" tab is shown.
D
Select [Program/Change/Delete Scan
Size].
E
After confirming [Register/Change]
is selected, press [Program Size 1] or
[Program Size 2].
Note
❒ If a size is already programed, it
is shown on the display. If not,
"pNot Programed" is shown.