Water Hardness; Display Brightness; Volume; Cup Heating - Miele CM6150 Operating Instructions Manual

Settings

Water hardness

Please see "Using for the first time" for
information about water hardness.

Display brightness

Change the display brightness using
the arrow sensors .

Volume

(CM6350)
You can set the volume of buzzer and
sensor tones using the arrow
sensors .
Tip: To switch off the tones, touch the
arrow sensor , until no segments are
filled and Switched off

Cup heating

(CM6350)
See "Cup heating" for more informa-
tion.
48
appears.

Factory default setting

You can reset the coffee machine to its
factory default settings.
The number of drinks and the machine
status (No. of drinks until the machine
must be descaled, ... Degrease the
brew unit) cannot be reset.
Please refer to the "Possible setting op-
tions" chart for the factory settings.
The following settings will not be re-
set:
– Language
– Time
Demo mode (Showroom pro-
gramme)
Do not activate this setting for do-
mestic use!
The coffee machine can be demon-
strated in the showroom using
the
Showroom programme
the machine lights up but drinks cannot
be made or actions taken.
If you activate the Demo mode, you
cannot switch the appliance off with
the On/Off sensor .
. In this mode