Cautions On The Control With Hdmi Function - Pioneer VSX-1326-K Operating Instructions Manual

% Press on the remote control,
then press PQLS to select the PQLS
setting.
The setting is displayed on the front panel
display.
! PQLS AUTO – PQLS is enabled. A precision
quartz controller in this receiver eliminates
distortion caused by timing errors (jitter),
giving you the best possible digital-to-analog
conversion when you use the HDMI interface.
This is valid as an HDMI function for PQLS-
compatible players.
! PQLS OFF – PQLS is disabled.
Cautions on the Control with
HDMI function
! Connect the TV directly to this receiver.
Interrupting a direct connection with other
amps or an AV converter (such as an HDMI
switch) can cause operational errors.
! Only connect components (Blu-ray Disc
player, etc.) you intend to use as a source to
the HDMI input of this receiver. Interrupting
a direct connection with other amps or an
AV converter (such as an HDMI switch) can
cause operational errors.
! When Control is set to ON, HDMI Input
in The Input Setup menu on page 28 is
automatically set to OFF.
! When the receiver's Control is turned ON,
even if the receiver's power is in the standby
mode, it is possible to output the audio and
video signals from a player via HDMI to
the TV without producing sound from the
receiver, but only when a Control with HDMI-
compatible component (Blu-ray Disc player,
etc.) and compatible TV are connected. In this
case, the receiver's power turns on and the
power and HDMI indicators light.
Control with HDMI function
En
08
49