Saeco PicoBaristo HD8927/06 Manual page 18

English
18
AQUACLEAN
FILTER
2 / 8
- The filter icon starts flashing 2 seconds on and 2 seconds off when the
filter capacity has dropped to 10%. This is the indication that the filter
performance has decreased so much that you should remove the filter
and install a new one.
- If you do not replace the filter, the filter icon starts flashing 1 second on
and 1 second off when the capacity has dropped to 0%. If you ignore this
indication, the filter icon will disappear from the display.
- When the filter icon has disappeared from the display, you have to
descale the machine before installing a new filter.
How to replace the filter
1 Press the MENU/SPECIAL DRINKS button, select MENU and press the OK
button to confirm. Scroll to select 'AquaClean' filter. Press the OK button
to confirm.
-
The display shows the number of AquaClean filters that have been
installed previously from 0 to 8 filters.
2 The display asks if you want to activate a new filter. Press the OK button
to confirm.
3 Follow the instructions on the screen to install the new filter, to fill the
water tank, to insert the hot water dispensing spout. Press the OK button
to confirm each step.
-
The filter activation screen appears with a progress bar showing the
progress of the filter activation.
-
When activation is finished, the display shows a tick to confirm
activation.
-
Then the machine ready screen appears with the AquaClean 100%
icon to indicate that the filter has been activated.
Replacing the filter after 8 filters were used
1 When the filter icon starts flashing on the display, press the
MENU/SPECIAL DRINKS button, select MENU and press the OK button
to confirm. Scroll to select the AquaClean filter. Press the OK button to
enter the filter menu.