Adjusting Quantity And Taste; Saeco Adapting System; Adjusting Coffee And Milk Length - Saeco PicoBaristo HD8927/06 Manual

1
1
2
HOT WATER

Adjusting quantity and taste

Saeco Adapting System

Adjusting coffee and milk length

ESPRESSO
1 Press the release buttons on the sides of the hot water dispensing spout
to unlock it.
2 Lift the hot water dispensing spout slightly and pull it out of the machine.
Dispensing hot water
Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until the cycle has ended before
removing the hot water dispensing spout.
1 Press the MENU/SPECIAL DRINKS button. Select ' Drinks' and scroll the
menu to select ' Hot water'.
Caution: Only select 'Hot water' in the menu when the hot water
dispensing spout is installed.
2 Press the OK button to confirm. The machine starts dispensing a preset
quantity of hot water.
-
To stop dispensing hot water, press the OK button or the hot water
button.
Note: If you don't stop the dispensing, the product stops automatically
when it reaches the default quantity or the memorized quantity.
Coffee is a natural product and its characteristics may vary according to
origin, blend and roasting. The machine is equipped with a self-adjustment
system that allows it to get the best taste out of your favorite coffee beans.
It regulates itself after brewing some coffees.
You can adjust the quantity of beverage brewed according to your taste and
to the size of the cups.
1 To adjust the length of espresso, press and hold the ESPRESSO button
until the display shows the MEMO icon.
-
The machine enters the programming phase and starts to brew the
selected beverage.
English
25