Toshiba PP350 User Manual page 156

User's Manual
8. Push the latches to the outside to release the module. A spring will force one
end of the module up.
Figure 8-14 Removing the memory module
9. Pinch the module by the sides and pull it out.
CAUTION: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
10. Insert a new module to the socket and push it downward to lie flat. Latches on
either side will click into place to secure the module.
11. Seat the insulation sheet to cover the module.
12. Insert two tabs into slit of the computer case and seat the keyboard at the
original position. Fix it with two screws removed in 5.
13. Seat the keyboard brace in the original position.
14. Replace the battery pack as described in Chapter 6, Power and Power-up
Modes.
15. Turn the power on and make sure the added memory is recognized. Open
System Properties in the Control Panel and click the General tab.
NOTE: When you view the memory display, the total amount will be
reduced by 16MB, which is used for VRAM.
8-14