Brushing Modes - Philips Sonicare HealthyWhite+ HX8962/05 Manual

10
English
Note: When using the White mode, two additional 15 second intervals
can be used for polishing your front teeth.
8 After you have completed the brushing cycle, you can spend
additional time brushing the chewing surfaces of your teeth and
areas where staining occurs. You can also brush your tongue,
with the toothbrush turned on or off, as you prefer (Fig. 10).
Your Philips Sonicare is safe to use on:
-
Braces (brush heads wear out sooner when used on braces).
-
Dental restorations (fillings, crowns, veneers).
Note: Ensure that braces or dental restorations are properly adhered
and not compromised. If not, braces or dental restorations may be
damaged when they come into contact with the brush head.
Note: When the Philips Sonicare is used in clinical studies, the
default 2-minute Clean mode with high intensity must be selected.
The handle should be fully charged and the Easy-start feature
deactivated.

Brushing modes

Clean mode
The ultimate in plaque removal (default mode). Clean mode lasts for
2 minutes and includes four 30 second Quadpacer intervals.
White mode
To brighten and polish your front teeth. White mode lasts for
2.5 minutes and includes four 30 second Quadpacer intervals and
two and two additional 15 second Quadpacer intervals to focus on
your visible front teeth.
1 Press the power on/off and mode button to turn on your
Philips Sonicare.
35_020_9633_2_DFU-Simple_A6_v1.indd 10 08/12/15 08:47