Table of Contents
Advertisement
3. From the front, slide the switch into the rack at the desired height.
4. Secure the switch to the front rack posts with M6 screws (Item 3) and either clip
5. Slide the rear mounting brackets (Item 7 and Item 8) into the slots available on the
42
NE2580O Installation Guide
nuts (Item 4) or cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1
Nm (50 inch-pounds).
front mounting brackets.
3
7
8
5
Advertisement
Table of Contents
