Table of Contents
Advertisement
22
www.aeg.com
SPOUTS, PRESS OK TO FILL
FILTER: Place the container under
the hot water/steam spout (B6), then
press OK. Delivery begins and stops
automatically.
13.2 Replacing the filter
Replace the filter (B4) when the message
REPLACE SOFTENER FILTER appears
on the display.
To replace, proceed as follows:
1. Follow the "Remove filter" procedure
(paragraph 13.3);
2. Extract the tank (A6) and exhausted
filter;
3. Remove the new filter from the pack-
aging;
4. Follow the "Install filter" procedure
(paragraph 13.1).
After two months (see date indica-
tor) or when the appliance has
not been used for 3 weeks, you
should replace the filter even if
the message has not yet been
displayed.
14. TECHNICAL DATA
Voltage: 220-240 V~ 50-60 Hz max. 10A
Absorbed power:
Pressure:
Water tank capacity: 2.5 litres
Size: LxHxD:
Weight:
This appliance conforms to EC
Regulation 1935/2004 concerning materi-
als and articles intended to come into
contact with food.
1350W
15 bar
594x454x412mm
20 kg
13.3 Removing the filter
If you want to use the appliance without
the filter (B4), it must be removed and its
removal must be signalled to the appli-
ance. Proceed as follows:
1. Extract the tank (A6) and exhausted
filter; reinsert the tank.
2. Turn the rotary (C2) to select "Menu",
then press the dial to confirm.
3. Select "Basic Settings", press to
confirm, select "Water" and confirm.
4. Select "Softener" and confirm.
5. Turn the rotary (C2) to select OFF
and confirm.
After two months (see date indica-
tor) or when the appliance has
not been used for 3 weeks, you
should replace the filter even if
the message has not yet been
displayed.
DISPOSAL
The appliance must not be
disposed of with household
waste, but taken to an author-
ised waste separation and
recycling centre.
Advertisement
Table of Contents
