Table of Contents
Advertisement
LED and Beeper Indications
The reader's beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional "Green Spot" also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader's func-
tions are programmable, and so may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.
Indicator
Power-up
Beep
Good Read
Beep
ROM Failure
Limited Scan-
ning Label
Read
Reader Active
Mode
Reader
Disabled
Quick Reference Guide
Description
The reader is in
the process of
powering-up.
A label has been
successfully
scanned by the
reader.
There is an error
in the reader' s
software/pro-
gramming
Indicates that a
host connection
is not estab-
lished.
The reader is
active and ready
to scan.
The reader has
been disabled by
the host.
LED and Beeper Indications
LED
N/A
LED behavior
for this indica-
tion is configu-
rable via the
feature "Good
Read: When to
Indicate"
(see the PRG for
information.)
Flashes
N/A
The LED is lit
a
steadily
The LED blinks
continuously
Beeper
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
The reader will
beep once at
current fre-
quency, volume,
mono/bi-tonal
setting and
duration upon a
successful label
scan.
Reader sounds
one error beep
at highest vol-
ume.
Reader ' c hirps'
six times at the
highest fre-
quency and cur-
rent volume.
N/A
N/A
23
Advertisement
Table of Contents
