Makita HR140DWMJ Instruction Manual page 9

Install the side grip (optional grip base set and standard
grip) so that the groove on the grip fit in the protrusion
on the spacer. Turn the grip clockwise to secure it.
► 1 . Side grip
Install the dust cup set so that the claws of the dust cup
fit in in the slits on the spacer.
1
2
► 1 . Dust cup 2. Claws
NOTE: If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
9 ENGLISH
1
► 1 . Dust cap
To remove the drill bit, pull the chuck cover down all the
way and pull the drill bit out.
2
► 1 . Bit 2. Chuck cover
To remove the dust cup set, hold the root of dust cup
and pull it out.
► 1 . Dust cup
NOTE: If the cap comes off from the dust cup, attach
it with its printed side facing up so that groove on the
cap fits in the inside periphery of the attachment.
1
1