Advertisement
P
RESSURE
Q U I C K I N S T A L L A T I O N G U I D E
HAR DWARE IN STALLA TI ON
To attach the Tablet Plate with a USB interface to the PC, insert the USB
connector into an available USB port on the PC.
Figure 1 Attaching Tablet Plate with a USB Interface to a PC
DRIVER INSTALLATION
For Windows:
1.
Insert the Driver disc into the CD-ROM drive, and wait for the Setup screen to appear.
2.
In most systems, the Setup program will start automatically. If it doesn't, start the
Setup program manually by selecting Start/Run, and type "E:\setup" (where "E:"
represents the location of the CD-ROM drive), then press the Enter key.
3.
Select the Tablet Driver Setup button and press OK to install the Tablet Driver. The
software will be installed automatically.
4.
Click on the PenSuite Setup button and press OK to install the PenSuite software. The
software will be installed automatically.
5.
You can also click on the Photoshop CS (Trial) button to install the software.
6.
You can also click on the Corel Painter IX (Trial) button to install the software.
7.
After the software is installed, close all open applications and click on the "Finish" or
"Exit" button to restart your computer.
-S
T
ENSITIVE
ABLET
1
E
NGLISH
Advertisement
Table of Contents
Related Manuals for Genius PenSketch 9x12
Summary of Contents for Genius PenSketch 9x12
-
Page 1: Driver Installation
RESSURE Q U I C K I N S T A L L A T I O N G U I D E HAR DWARE IN STALLA TI ON To attach the Tablet Plate with a USB interface to the PC, insert the USB connector into an available USB port on the PC. - Page 2 1. For the cordless pen (stylus) or the wireless mouse, tap on any surface or press the left button of the mouse to “wake it up”, in case the pen or the mouse has gone to "sleep" after it is not used for a few minutes.
Need help?
Do you have a question about the PenSketch 9x12 and is the answer not in the manual?
Questions and answers