Genius EASY PEN i405 Quick Installation Manual

CAUTION: PLEASE INSERT THE DRIVER CD INTO YOUR COMPUTER FIRST AND
THEN FOLLOW THE INSTRUCTIONS TO COMPLETE YOUR SETUP
PROCESS.

INTRODUCTION

DRI VER INSTALLATION

Windows:

1. Insert the driver disc into your computer's CD-ROM drive. When prompted, select "Driver Setup", and press OK to
install driver.
Note: In most systems, the Setup Wizard will start automatically. If Automatic Setup does not begin, start the Setup
program manually by selecting "Start/Run", type "E:\setup", where "E:" represents the location of the CD-ROM
drive, then press "Enter".
Note: In certain cases, Windows might ask for your permission because it cannot recognize the driver you are
downloading. If this occurs, select "Continue Anyway" and continue to install.
2. Please insert the driver CD into your computer first and then follow the instructions to complete your setup process.

Macintosh:

1. Insert the driver disc into your computer's CD-ROM drive.
2. Check to see if the "Genius Tablet" is shown on the screen. Double click the icon then follow the instruction.
3. Enter your administrator name and password to process the next step till it's finished.
Note: For more information, refer to the MAC user manual on the driver disc.
CAUTION: ONCE THE INSTALLATION HAS BEEN COMPLETED, REBOOT YOUR MACINTOSH BEFORE
PLUGGING THE DEVICE INTO YOUR COMPUTER.

HARDWARE INSTALLATION

CAUTION: MAKE SURE THAT YOU HAVE INSTALLED THE DRIVER SOFTWARE (SEE ABOVE) INTO
YOUR COMPUTER BEFORE INSTALLING THE HARDWARE.
1. Plug the Graphic Tablet USB cable into your computer's
G
E N I U S
Q U I C K I N S T A L L A T I O N G U I D E
USB port (located on the computer, display, or keyboard).
The Graphic Tablet's LED light will indicate the operational
status, and your computer screen will display a "found new
hardware" message.
G T
R AP H I C A B LE T
1. Working area
2. Button 2
3. Button 1
4. Pen tip
1
ENGLISH