Graco Fusion CS 312666F Manual page 21

4. To increase variable flow: push in and turn
variable flow knob counterclockwise.
To decrease variable flow: push in and turn
variable flow knob clockwise.
F . 28
IG
The variable flow adjustment knob cannot
be adjusted when the flow selector knob is
in the safety stop position. See F
The variable flow adjustment knob locks
into detents every 15°. Ensure knob is
locked into a detent before proceeding to
step 5.
312666F
5. Turn air valve ON, and open fluid valves.
6. Test spray pattern on cardboard. Repeat
Variable
Flow
Adjustment
Knob
TI11344a
F
IG
. 27.
IG
Verify that flow selector knob is set to the
variable flow position. See F
steps 1 through 6 until desired spray pat-
tern is reached.
. 29
Variable Flow
. 27.
IG
TI11334a
21