Cleaning - Bush DW9SLINTW Instruction Manual

Care and maintenance
Looking after your appliance

Cleaning

Cleaning your Dishwasher is important to maintain the
machine's service life.
Oil and lime may build up in your Dishwasher over
time. If this occurs:
• Fill the detergent compartment but do not load
any dishes. Select a programme which runs at
high temperature and run the Dishwasher empty.
If this does not clean your Dishwasher
sufficiently, use a cleaning agent designed for use
with dishwashers.
• Wipe the door seals regularly with a damp cloth
to remove any accumulated residue.
6.1 Cleaning machine and filters
Clean the filters and spray arms at least once a week. If
any food waste remains on the coarse and fine filters,
remove them and clean them thoroughly with water.
a) Micro Filter b) Coarse Filter c) Metal Filter
To remove and clean the filter combination, turn it
counter clockwise and remove it by lifting it upwards
(1).Pull the coarse filter out of the micro filter (2).Then
pull and remove the metal filter (3).Rinse the filter with
lots of water until it is free of residue. Reassemble the
filters. Replace the filter insert, and rotate it clockwise
(4).
• Never use your Dishwasher without a filter.
• Incorrect fitting of the filter will reduce the
washing effectiveness.
• Clean filters are necessary for proper running of
the machine.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Care and maintenance
30
6.2 Spray Arms
Make sure that the spray holes are not clogged and
that no food waste is stuck to the spray arms. If there is
any clogging, remove the spray arms and clean them
under water. To remove the upper spray arm undo the
nut holding it in position by turning it clockwise and
pulling it downwards. Make sure that the nut is
properly tightened when refitting the upper spray arm.