Adjusting the tension of the door spring The door of the dishwasher is attached to springs. These are set at the factory to ensure that they are at the proper tension, so that the door can open and close smoothly. After the furniture door has been fitted, you will need to adjust the tension of the door spring.
Page 14
The unit is equipped with a function that you can adjust the frequency to release the salt to the water softener. This is further to the selector on the salt container. The default setting is H4. IMPORTANT : YOU SHOULD SET THIS VALUE ACCORDING TO THE WATER HARDNESS OF YOUR AREA BEFORE THE 1 USE.
Page 18
appliance Cutlery tray Cutlery should be placed in the cutlery tray as shown in diagram. They should be placed in different area zone to ensure the water runs off freely. WARNING! Do not let any item extend through bottom...
Page 20
Standard daily cycle for normally soiled loads, such as pots, plates, glasses.
Page 21
button. Continue to press “program” button until the desire washing program is selected. Once the desired washing program is selected, close the door and the machine will start to operate. The unit will produce a click sound when the door is closed properly. When the washing is finished, you can switch it off by pressing the ON/OFF button once.
Page 24
Technical specifications (according to EU Directive 1059/2010) Brand BUSH Model DWFS147SS Capacity 14 settings Energy efficiency class Annual energy consumption 266kWh Energy consumption of the standard cleaning cycle 0.93 kWh Power consumption of off-mode/left-on mode 0.1W/0.9W Annual water consumption 3080 litre...
Need help?
Do you have a question about the DWFS147SS and is the answer not in the manual?
Questions and answers