Table of Contents
Advertisement
> Specifications
> Advanced Setup
Setting item
Default Value
Loudness Plus
On
16
> Listening Modes
Setting Details
When the setting is set to "On", it is possible to
enjoy even subtle nuances of audio expression
at low volume. This is only available when the
THX listening mode is selected.
THX Loudness Plus
THX Loudness Plus is a new volume control
technology featured in THX Ultra and THX
Select Certified receivers.
With THX Loudness Plus, home theater
audiences can now experience the rich details
in a surround mix at any volume level.
A consequence of turning the volume below
Reference Level is that certain sound elements
can be lost or perceived differently by the
listener.
THX Loudness Plus compensates for the
tonal and spatial shifts that occur when the
volume is reduced by intelligently adjusting
ambient surround channel levels and frequency
response.
This enables users experience the true impact
of soundtracks regardless of the volume
setting. THX Loudness Plus is automatically
applied when listening in any THX listening
mode. The new THX Cinema, THX Music, and
THX Games modes are tailored to apply the
proper THX Loudness Plus settings for each
type of content.
> Network Functions
3. Audio Adjust
Make advanced settings such as those related to multiplex audio, settings for the LFE level,
or those related to the volume of this unit.
■ 1. Multiplex/Mono
Setting Item
Default Value
Multiplex Input
Main
Channel
Mono Input
Left + Right
Channel
Mono Output
Center
Speaker
> Basic Manual
Troubleshooting Supplementary Information, etc.
|
Setting Details
Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be output
at the same time.
• If multiplex audio is being played, "1＋1" will be
displayed when
on the remote controller is
pressed.
Set the input channel to use for playing any 2 ch
digital source such as Dolby Digital, or 2 ch analog/
PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left + Right" : Left and right channels
Select the speaker to output monaural audio in the
Mono listening mode.
"Center": Audio is output from the center speaker.
"Left/Right": Audio is output from the front L/R
speakers.
• If an item cannot be selected even though
connection is correct, check that the settings
in "2. Speaker" - "Configuration" - "Speaker
Channels" matches the number of connected
channels.
Advertisement
Chapters
Table of Contents
