Onkyo TX-NR777 Basic Manual page 20

> Before Start > Part Names
BD/DVD
a Digital coaxial cable, b Analog audio cable
20
> Install
b
a
OR
> Initial Setup > Playback
MAIN ROOM
ZONE2
LINE
IN
ZONE2 LINE OUT
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
5. Multi-zone Connection-1 (ZONE 2 LINE
OUT)
You can enjoy 2ch audio in the separate room through
speakers connected to a pre-main amplifier by, for
example, playing a Blu-ray Disc player in 7.1 ch in the main
room (where this unit is located) and listening to internet
radio in the separate room (ZONE 2).
Connect the ZONE 2 LINE OUT jacks of the unit and the
LINE IN jacks of the pre-main amplifier in a separate room
with an analog audio cable.
0 DSD and Dolby TrueHD audio signals are not output to
ZONE 2 when selected with the "NET" input selector.
Connections with an AV component
When outputting the audio of an externally connected AV
component to ZONE 2, you need to connect using a digital
coaxial cable, digital optical cable, or analog audio cable.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (P24) to enjoy this feature.
0 The audio from externally connected AV
components can only be played in ZONE 2 when
the audio is analog or 2ch PCM audio. If you have
connected to this unit with a digital coaxial cable
or digital optical cable, it may be necessary to
change the audio output of the AV component to
PCM output.