Package Contents/Tools Required; General Description - ICM Controls SC2000L Installation, Operation & Application Manual

Package includes: SimpleComfort
labels, screws and wall anchors, batteries (if applicable), Installation, Operation and Application Guide.
Tools required for installation: Drill with 3/16" bit, hammer, screwdriver.
• The SimpleComfort ®
• Compatible with single-stage heating systems, heating/cooling systems, and heat pump systems; works
with gas, oil, or electric systems
• Compatible as a master thermostat in zoned system applications
• Freeze Protection Feature: Protects pipes from freezing! If the room temperature drops to 40 ° F, the
thermostat automatically turns on the heat; the thermostat must be in the Heat position; works even if
the batteries are dead
• Built-in Compressor Protection for Air Conditioners: To protect the A/C's compressor, there is a 5-minute
delay between the system turning off and the A/C starting
• System Customization: Three available temperature differential settings

Package Contents/Tools Required

®
non-programmable thermostat on base, thermostat cover, wiring

General Description

thermostat is a digital, mercury-free, non-programmable, electronic thermostat