Specifications; Important Safety Information; Package Contents/Tools Required - ICM Controls SC 3000 Installation, Operation & Application Manual

Programmable electronic thermostat
Table of Contents

Advertisement

Electrical rating: • Millivolt to 30 VAC/VDC
• DC Power: 3.0 VDC (2 "AA" alkaline batteries included)
• 1 amp maximum per terminal
• 3 amp maximum total load
Temperature control range: 45°F to 90°F (7°C to 32°C) Accuracy: ± 1°F (± 0.5°C)
System configurations: 1-stage heat, 1-stage cool, heat pump, gas, oil, electric, millivolt
Terminations: RH, RC, W, Y, B, O, G
WARNING!: Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
• This thermostat is for 24 VAC/VDC applications only; do not use on voltages over 30 VAC/VDC
• Do not short across terminals of gas valve or system control to test operation; this will damage your
thermostat and void your warranty
• All wiring must conform to local and national electrical and building codes
• Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
• Use this thermostat only as described in this manual
Package includes: SimpleComfort
wall anchors, Installation, Operation and Application Guide.
Tools required for installation: Drill with 3/16" bit, hammer, screwdriver.

Specifications

Important Safety Information

Package Contents/Tools Required

®
3000 thermostat on base, thermostat cover, wiring labels, screws and


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents