Adapter Connection; Other Connections; Remote Control - LG 43LF5710.APH Owner's Manual

Table of Contents

Advertisement

Adapter connection

(Depending on model)
CAUTION
•  Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV's power plug to a wall power outlet.
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω).
HDMI ULTRA HD deep colour
settings
(Only UF67**)
•  SETTINGS
PICTURE
HDMI ULTRA HD Deep Colour
HDMI (1/2) ULTRA HD Deep Colour
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off : Support 4K @ 50/60 Hz (4:2:0)
•  All HDMI ports support the HDCP 2.2.
•  4K Source is only supported in HDMI input.
•  4K signal and content are not available in the RF/USB input.
•  All HDMI input ports support 4K @ 50/60 Hz (For details on the
supported specifications, refer to the table below.) for high-
definition video. Picture or sound may not be supported depending
on the specifications of the external device connected. In that case,
change the settings for HDMI ULTRA HD Deep Colour.
4K @ 50/60 Hz Support Format
Frame rate
Resolution
(Hz)
YCbCr 4:2:0
50.00
3840 x 2160p
59.94
4096 x 2160p
YCbCr 4:4:4
60.00
RGB 4:4:4
1 : Only supported when HDMI ULTRA HD Deep Colour turned "On".
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
•  Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
•  If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.

Remote control

(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
•  Do not mix old and new batteries, as this may damage the remote
•  In Analogue TV and some countries, some remote control buttons
•  The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
Colour Depth /
Chroma Sampling
8 bit
10 bit
12 bit
YCbCr 4:2:0
1
YCbCr 4:2:2
1
-
-
1
-
-
1
and
ends to the label inside the
CAUTION
control.
may not work.
1
2
3
A
B
15

Advertisement

Table of Contents
loading

Table of Contents