Separate Purchase - LG 43LF5710.APH Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Preparing

NOTE

• Image shown may differ from your TV.

• Your TV's OSD (On Screen Display) may differ slightly from that

shown in this manual.

• The available menus and options may differ from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The TV can be placed in standby mode in order to reduce the power

consumption. And the TV should be turned off if it will not be

watched for some time, as this will reduce energy consumption.

• The energy consumed during use can be significantly reduced if the

level of brightness of the picture is reduced, and this will reduce

the overall running cost.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV's USB port.

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI

cable (3 m or less)

- High-Speed HDMI

cable with Ethernet (3 m or less)

• How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the component Y, Pb, Pr, L, R and AV Video, L, R.

[Cross Section of Ferrite Core]

[to an External device]

10 mm

18 mm

20 mm (+ / -5 mm)

[to the TV]

20 mm (+ / -5 mm)

CAUTION

• Do not use any unapproved items to ensure the safety and product

life span.

• Any damage or injuries caused by using unapproved items are not

covered by the manufacturer's warranty.

• Some models have a thin film attached on to the screen and this

must not be removed.

• When attaching the stand to the TV set, place the screen facing

down on a cushioned table or flat surface to protect the screen

from scratches.

• Make sure that the screws are fastened completely. (If they are

not fastened securely enough, the TV may tilt forward after being

installed.) Do not use too much force and over tighten the screws;

otherwise screw may be damaged and not tighten correctly.