Connection Of External Equipment - LG 29FS4RN Owner's Manual

Connection of external equipment

You can connect additional equipment, such as
VCRs, camcorders etc. to your set.
What is shown here may be somewhat different
from your set.
Aerial socket
1. Connect the RF out socket of the VCR to the
aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in
socket of the VCR.
3. Store the VCR channel on the programme
number 0 using the 'Manual programme tun-
ing' section.
4. Select the programme number where the VCR
channel is stored.
5. Press the PLAY button on the VCR.
Audio/Video in/out sockets (option)
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2. If the VCR is connected to the AV sockets on
the set, press the TV/AV button to select
, AV 2 , AV3 .
A V1 or
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
You can also record programmes received by
the TV on video tape via audio/video out sock-
ets.
Note :
If you have a mono VCR, connect the audio
cable from the VCR to the AUDIO L/MONO sock
et of the set.
Euro scart socket(option)
1. Connect the Euro scart socket of the VCR to
the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when
connected to Euro scart socket, the set will
switch to mode automatically. But if you
A V1
want to keep on watching TV mode, press
the TV/AV button to select TV.
Otherwise press the TV/AV button on the
remote control handset to select
VCR playback picture appears on the screen.
You can also record programmes received by
theTV on video tape.
Note : Signal type RGB, i.e. the signals red, green
and blue can only be selected for the Euro scart
socket. These signals are transmitted, for exam-
ple, by a pay TV decoder, game machine or photo
CD unit, etc.
Component in sockets (option)
1. Connect the COMPONENT video output sockets
(Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the COMPO-
NENT (480i/480p/576i/576p/720p/1080i/1080p) to
the COMPONENT INPUT sockets (Y P
on the set.
2. Connect the audio cable from the COMPONENT
(480i/480p/576i/576p/720p/1080i/1080p) to
AUDIO IN sockets of COMPONENT.
3. Press the TV/AV button to select
NENT .
4. Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears
on the screen.
HDMI (option)
1. Connect the HDMI output of the DVD or the
digital set-top box to the HDMI jack on the
set.
2. Press the TV/AV button to select
3. Turn on the DVD or the digital set-top box.
(Refer to the owner's manual for the DVD or
the digital set-top box.)
Note :
a. TV can receive the video and audio signal
simultaneously with using a HDMI cable.
b. If the digital set-top box supports Auto HDMI
function,the output resolution of the soource
device will be automatically set to 1920x1080i.
c. If the digital set-top box player does not sup-
ports Auto HDMI function ,you need to set set
the out put resolution appropriately.
To get the best picture quality,adjust the output
resolution of the soource device to 1920x1080i.
d. The HDMI cable is not supplied with the set.
.The
A V1
P )
B R
COMPO-
HDMI .
3