LG 40LX774H Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. 40LX774H
  6. Setup manual

LG 40LX774H Setup Manual

Lodging guest interactive pro centric
Hide thumbs Also See for 40LX774H:
Table of Contents

Advertisement

Quick Links

© Copyright 2017 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric 
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
40LX774H
43LX774H
49LX774H
55LX774H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 16 – 25
Custom Master TV Setup
pages 41 – 43
Cloning Procedures
pages 44 – 50
P/N: 206-4309 (Rev E)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG 40LX774H

Summary of Contents for LG 40LX774H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 16 – 25 Custom Master TV Setup pages 41 – 43 Cloning Procedures pages 44 – 50 P/N: 206-4309 (Rev E) © Copyright 2017 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its Follow all instructions. appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced Do not use this apparatus near water.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Table of Contents Safety Warnings ........2 Creating an FTG Configuration File .

  • Page 6: Commercial Mode Overview

    This document describes how to set up LX774H Pro:Centric  TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translation Controller (PTC), or embedded b-LAN™ (EBL) module, or it resides in a Pro:Centric application or an external device from the solution provider.

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access PTC INSTALLER MENU the commercial controller (PTC) Installer Menu and make changes to xxLX774H the default values as required. If necessary, familiarize yourself with CPU - CTV the Installer Menu and how to make and save changes.
  • Page 8 Wi-Fi Zoning options for location-specific configuration. Menu settings using one of the following processes: LG’s FTG File Manager PC software enables you to • Local: Configure an individual LX774H TV’s EBL create an FTG Configuration (.tlx) file, which may be used via its TV-LINK CFG jack using a direct PC-to-TV to configure the CPU for FTG Mode.

  • Page 9: Application Tuning Mode / Pro:centric Direct

    Note: Physical channel tuning is not available when IP channels are included in the FTG Channel Map. While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only.

  • Page 10: Determining The Tv Operating Mode

    While the TV is in Application Tuning Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • While it is possible to update a TV’s Installer Menu and/or Setup Menu settings locally using a USB memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made...

  • Page 11: Pro:centric Operation

    Pro:Centric Operation These TV models support LG’s Pro:Centric Java application, as well as the Pro:Centric Direct HTML application. Only one application may be implemented at a time. The following sections provide an overview of the application features and functionality. Interactive Menu Features...
  • Page 12 Pro:Centric Operation (Cont.) Example: Pro:Centric Java Application Portal Example: Pro:Centric Direct HTML Application Portal 206-4309...
  • Page 13 Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java application operates in conjunction with FTG and/or PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide.

  • Page 14: Pro:centric Java Application Setup

    Pro:Centric Operation (Cont.) TV in FTG Mode If the TV is already in FTG Mode (via CPU or EBL), use the appropriate FTG application to update Installer Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu settings to the TV in accordance with the FTG Mode of configuration.

  • Page 15: Pro:centric Operation

    Pro:Centric Operation (Cont.) TV in Pass-through Mode If the EZ-Manager Wizard has been exited and the TV is in Pass-through Mode, either: • Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values. See Installer Menu information on pages 30 to 40 for further details. Also, as necessary, refer to “Custom Master TV Setup”...

  • Page 16: Ez-Manager Wizard

    EZ-Manager Wizard Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the EZ-Manager Wizard to appear. The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual) of configuring the essential Installer Menu items for Pro:Centric operation.

  • Page 17: Initiate Configuration Or Exit The Ez-Manager Wizard

    EZ-Manager Wizard (Cont.) Initiate Configuration or Exit the EZ-Manager Wizard The Welcome screen provides a brief introduction to the EZ-Manager Wizard. WELCOME TO THE EZ-MANAGER WIZARD Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation or to configure the TV using a USB memory device.

  • Page 18: Tv Configuration Options

    EZ-Manager Wizard (Cont.) TV Configuration Options From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature(s) on the TV for location-specific configuration purposes, select the “Zones &...
  • Page 19 EZ-Manager Wizard (Cont.) EZ-Manager Wizard (Cont.) Note: Zoning features are only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). ZONES, LABEL, AND ROOM NUMBER Wi-Fi Zone If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi <...

  • Page 20: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “NEXT” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: Select the “BACK” button, where available, to check previous settings, as necessary. SEARCHING FOR PRO:CENTRIC SERVER... This step automatically searches for the Pro:Centric Server.
  • Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example, “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGUR...
  • Page 22 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then press OK. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.
  • Page 23 EZ-Manager Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel.

  • Page 24: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric Configuration screen example on page 21). When the Pro:Centric configuration is complete, an EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.

  • Page 25: Ez-Manager Wizard

    EZ-Manager Wizard (Cont.) USB Configuration via EZ-Manager Wizard With either the TV Configuration Options or the Zones, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device. 1. Insert the USB memory device with the appropriate file(s) into either of the TV’s USB ports. 2.

  • Page 26: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: •...
  • Page 27 Ez Download Utility (Cont.) (Continued from previous page) • If the wizard is displayed, you can access the Ez Download utility via the wizard, as indicated above (see “Before You Begin”). However, to continue with this procedure and access the Ez Download utility from the TV menus, exit the EZ-Manager Wizard.
  • Page 28 Ez Download Utility (Cont.) (Continued from previous page) 6. If more than one USB memory device is currently connected to the TV, be sure to select the USB device that contains the file(s) you wish to use. If necessary, use the arrow keys on the Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and press OK.

  • Page 29: Ez Download Utility

    Ez Download Utility (Cont.) (Continued from previous page) 9. If a Clone/Configuration (.tlx) file that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner Display field will be displayed at the right of the screen. If the FTG Channel Map comprises RF channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can choose the format for the channel tuning/banner display.

  • Page 30: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG Configuration (.tlx) file created using LG’s FTG File Manager software or configuring the EBL locally (.rml) or remotely (via FMA-LG102 / .fma) using the FTG Device Configuration Application software.

  • Page 31: Navigating Within The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 32 Installer Menu (Cont.) Installer Menu Items 000 through 071 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 33 Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function Value Range Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...

  • Page 34: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE 003 - BAND/AFC (Band/Automatic Frequency Control) Specifies entry sequence to the Installer Menu. There are four possible settings for this option: 0 = Broadcast 1 = CATV (default) 0 = 9876 1 = 4321 2 = HRC...
  • Page 35 Installer Menu (Cont.) 016 - EN TIMER (Enable On/Off Timers) NOTE: For items 007, 008, and 009 If set to 1, the Timer function is available to the end user and For legacy reasons, the scale used is 0 – 63. The PTC software enabled continuously.
  • Page 36 External Speaker (Optical/HDMI ARC) 039 - REAR AUX EN. (Rear Aux Enable) Enabled LG Sound Sync (Optical) Set to 1 to enable display panel rear Aux (AV) input. Set to 0 to disable display panel rear Aux (AV) input. Disabled...
  • Page 37 Installer Menu (Cont.) 069 - EN. CH-T COL. (Enable Display Characters Custom Color) 081 - UPN LSB (UPN Least Significant Byte) Set to 1 to enable custom color for MPI display characters. Set to User programmable number, least significant byte readable by 0 to disable custom color for MPI display characters.
  • Page 38 If set to 0 (default), the TV’s MMR (Magic Motion Remote) feature 4 = Zoom is enabled, and a compatible LG MMR (not supplied) may be used Note: This item is not available in the Installer Menu unless item with the TV. If set to 2, the MMR feature is disabled.
  • Page 39 Installer Menu (Cont.) 103 - ATSC TUNE MODE Caution: POWER SAVINGS should NEVER be set to 7. Sets ATSC tuning mode. Default set to 1 for Physical Channel This setting is intended for factory use only. scan. Set to 0 for Virtual Channel scan. 119 - DATA CHANNEL 104 - START MINOR CHANNEL Set to 0 to disable.
  • Page 40 Installer Menu (Cont.) Random Distribution of Update Time: If this item is set to 128 122 - UPDATE TIME MN (OFF), the time at which a Data Channel Auto Search (item 119 Set the Wake For Update minute from 0 to 59. If item 121 is NOT set to 255) and/or an Instant ON update (item 002 set to 2 or 3) set to 128 and you wish to invoke the “random”...

  • Page 41: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode.

  • Page 42: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2.
  • Page 43 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press MENU PICTURE PICTURE SETTINGS on the Installer Remote, and select the All Settings Picture menu icon from the Quick Settings Menu to access the advanced TV setup menus.

  • Page 44: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the FTG File Manager and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 45 Cloning Procedures (Cont.) (Continued from previous page) 5. Use the arrow navigation keys to select/highlight either the General menu icon from the TV setup menus or the Safety menu icon from the Function Menu. Then, press the number “7” key a total of seven times to access the TV Manager.

  • Page 46: Importing A Clone File

    Cloning Procedures (Continued from previous page) TV MANAGER Export Clone File USB DEVICE USB 1: Device Name Ez Download Select the filename, and then select EXPORT below. Logo Image Download Insert Background Image(s) xxLX774H-UA_1.TLX Update TV Software Update PTC Software Import Clone File Export Clone File Diagnostics EXPORT...
  • Page 47 Cloning Procedures (Cont.) • Avoid using special characters, such as ?, &, @, etc., in the Clone/Configuration (.tlx) filename. • If the EZ-Manager Wizard appears on the screen when you turn ON the Target TV, you can use the wizard’s “USB Configuration” option to access the TV Manager and complete the import procedure (see “TV Configuration Options”...
  • Page 48 Cloning Procedures (Cont.) Import Clone File Procedure 1. Turn ON the Target TV. 2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, you can complete the import procedure via the wizard, as indicated above (see “Before You Begin”).
  • Page 49 Cloning Procedures (Cont.) (Continued from previous page) 8. If more than one USB memory device is currently connected to the TV, be sure to select the USB device that contains the “.tlx” file you wish to use. If necessary, use the arrow keys on the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the screen and press OK.

  • Page 50: Cloning Procedures

    Cloning Procedures (Cont.) (Continued from previous page) 12. When you are ready to continue, select UPDATE on the screen and then press OK on the Installer Remote. Import progress will be displayed on the screen. This process may take a few minutes. Do NOT remove the USB device while importing is in progress.

  • Page 51: Creating An Ftg Configuration File

    CANNOT BE SWITCHED TO FTG MODE. This section provides an overview of the FTG File Manager, which is used for FTG Mode via CPU configuration. The software is available online at: www.lg.com/us/business/display-solutions/ftg. Creating an FTG Configuration File The procedure below describes how to use the FTG File Manager utilities (see sample screens on pages 53 to 56) to create an FTG Configuration (.tlx) file that can be saved to a USB memory device.

  • Page 52: Ftg File Manager Utilities Overview

    FTG File Manager Utilities Overview (Continued from previous page) Note: To remove an individual item from the FTG Configuration List or the Setup Menu List, click on/ highlight the item to be removed, and then click the Remove Item button directly above the applicable “List”...

  • Page 53: Ftg File Manager Main Screen

    FTG File Manager Utilities Overview FTG File Manager Main Screen The FTG File Manager main screen enables you to compile, modify, and save FTG Configuration (.tlx) files. It also allows you to change the Zone assignment for each Installer Menu profile, if desired (see Reference section, “Using the TV’s Zoning Features,”...

  • Page 54: Ftg Channel Map Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. EDIT/ADD MAP PRINT MAP Click to open the FTG Click to display a printable Channel Map Editor to create FTG Channel Map Report.

  • Page 55: Ftg Channel Map Editor

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. LOGICAL CHANNEL MAPPING CUSTOM CHANNEL LABELS/ICONS SET CHANNEL ATTRIBUTES Select a Logical Channel number. Then, Enter custom labels and select icons by Check/select Encrypted, OSD, assign the RF, Major, and Minor channel...

  • Page 56: Ftg Installer Menu Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Installer Menu Configuration Utility CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. Filename of opened FTG Configuration (.rml) file created using FTG Device Configuration Application. Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters.

  • Page 57: Ip Environment Setup

    IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV. If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 41 to 43), all IP Environment settings, with the exception of Wired Network Connection settings, the TV name (editable in the Media Share Menu), DIAL, and SoftAP settings, may be cloned.
  • Page 58 IP Environment Setup (Cont.) Configuring a Wired Network Connection Note: If desired, you can configure both wired and wireless NETWORK SETT... connections. However, note that a wired connection is always prioritized over a wireless connection. That is, when the TV is Network Network / turned OFF and then back ON, if a LAN cable is detected between...
  • Page 59 IP Environment Setup (Cont.) (Continued from previous page) If the network is connected successfully, a “Connected to Internet” message will appear just below the progress display. If the network connection is not successful, the progress display will identify the network element in which the connection failed. Check your cabling and/or verify the configuration data, as necessary.
  • Page 60 IP Environment Setup (Cont.) IP Stream Control If necessary, due to an audio and/or video stream delay, IP Stream Control options enable you to compensate for synchronization irregularities by allowing audio PTS and video PTS offset modifications. This menu also enables you to specify the IGMP version (2 or 3). Note that any modifications to these settings should be performed by qualified personnel only.

  • Page 61: Pro:centric Setup

    IP Environment Setup (Cont.) Pro:Centric Setup Pro:Centric options enable you to configure the TV with the appropriate settings to connect to the Pro:Centric server. Use the Up/Down arrow PRO:CENTRIC keys on the Installer Remote to navigate between fields. Network 1. With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select the Pro:Centric menu option.
  • Page 62 IP Environment Setup (Cont.) (Continued from previous page) IP Configuration Note: If the server IP address and port number or domain name have already been set in the EZ-Manager Wizard, the specified data will be reflected in the fields displayed. Note: Setting the Media Type to “IP”...

  • Page 63: Media Share Setup

    : Allows guests to use the TV to access and view data shared either by ® wired DLNA Certified devices connected to the same LAN as the TV or by wireless LG ® devices using LG’s Smart Share application with Wi-Fi Direct ®...
  • Page 64 OK on the Installer Remote. displayed since enabling Bluetooth • Select the appropriate values in the Wi-Fi Signal Strength and Sound Sync renders Wireless LG Wi-Fi Channel fields, as required. Sound Sync unavailable. Select Yes to continue.

  • Page 65: Pre-Loaded Applications

    IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display in the TV’s Smart Launcher, which appears along the PRE-LOADED... bottom of the screen. Network When the Pro:Centric application is disabled, the Smart Launcher is available to end users via the PORTAL button on the remote control.

  • Page 66: Remote Jack Pack / Tv Connections & Setup

    Reference: Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 1).

  • Page 67: Updating Tv/Ptc Software Using A Usb Memory Device

    Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.

  • Page 68: Memory Device

    Reference: Updating TV/PTC Software using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s)
  • Page 69 Reference: Downloading a Splash Screen Image using a USB Memory Device This section describes how to download a splash screen image using the TV Manager “Logo Image Download” option, though you may also use the Ez Download utility to download the splash screen image, if desired.
  • Page 70 Reference: Downloading a Splash Screen Image using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s)
  • Page 71 Reference: Downloading Background Images using a USB Memory Device Background images are intended for use with audio-only channels and the Bluetooth Sound Sync feature. Once a mobile device has been paired with the TV, guests may choose to display a slideshow on the screen (as opposed to a blank screen or the Bluetooth Sound Sync screen) while audio is playing.
  • Page 72 Reference: Downloading Background Images using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s)

  • Page 73: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 40LX774H 43LX774H 49LX774H 55LX774H Item 099 Back Power Power Power Power Percent Percent Percent Percent Lighting...

  • Page 74: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS Installer STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Menu Item Installer Menu 0x41 SOURCES CURRENT AV 046 START ENABLED (R/W) SOURCE (R) SOURCE (R) AUX SRCE (Start Aux Installer...

  • Page 75: B-Lan Setup & Overview

    3 (default) A b-LAN enabled head end device, such as an LG FMA-LG102, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device.

  • Page 76: Ftg Mode Via Ebl (Local Configuration)

    (EBL) connection. Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for further information. FTG Device Configuration Application software is available online at: www.lg.com/us/business/display-solutions/ftg. Note: If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings.

  • Page 77: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the Aux Inputs Values table on the following page.

  • Page 78: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 79: Rjp Model List & Input Auto-Sensing Hierarchy

    Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Legacy Models • RJP-101M • RJP-110WBR • RJP-101ML • RJP-110S • RJP-110F • RJP-120G • RJP-110FW • RJP-120T • RJP-110W • RJP-201B/202B RJP Scaler Models • RJP-301B RJP Input Auto-sensing Hierarchy Priority Video Audio...

  • Page 80: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/ password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 81: Using The Tv's Zoning Features

    Reference: Using the TV’s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the LX774H model TVs. These features are primarily intended for use when the TV is configured for FTG Mode operation; however, Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and Setup Menu profile Zone assignments), may also be used with TV cloning processes using a USB memory device / “.tlx”...
  • Page 82 Reference: Using the TV’s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the FTG Channel Map Editor overview on page 55. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
  • Page 83 Reference: Using the TV’s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Configuration A location-specific Wi-Fi configuration / Clone (.tlx) file may be saved (exported) from a Master TV and then be used to configure Target TVs. First, the wireless network (i.e., the access point login data) must be configured in the Master TV’s IP Environment Menu (see “Configuring a Wi-Fi Network Connection”...

  • Page 84: Using The Tv's Zoning Features

    Reference: Using the TV’s Zoning Features (Cont.) (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV. Select/highlight the Label field and press OK. Then, use the Up/Down arrow keys to select the applicable label. Press OK when you are finished.

  • Page 85: Using Media Share Features

    Smart Share with Wi-Fi Direct The following steps describe how to access and use Wi-Fi Direct (i.e., to connect to a wireless LG device). Remember that you must also turn ON Wi-Fi Direct and launch the Smart Share application on the LG device.
  • Page 86 GENERAL WI-FI DIRECT Picture Picture General / REFRESH LIST Sound Sound Language [TV]LG Smart TV Note: The example at left Room Info shows the General Menu when Channels Channels Time & Date the TV is in Pass-through Mode. Timers The Wi-Fi Direct screen is the...
  • Page 87 Reference: Using Media Share Features (Cont.) Screen Share (Miracast / WiDi) The following steps describe how to access and use the Miracast / WiDi features. Note: This procedure describes how to access Screen Share from the TV’s Smart Launcher. If the TV is not in Pass-through Mode, it is also possible to access Screen Share from the TV’s General Menu.

  • Page 88: Using Media Share Features

    Reference: Using Media Share Features (Cont.) SoftAP The following steps describe how to access and use the SoftAP feature. Note: This procedure describes how to access SoftAP using the Wi-Fi Service option available from the TV’s Smart Launcher. It is also possible to access SoftAP from the TV’s General Menu. 1.

  • Page 89: Lx774H Rear And Side Jack Panels

    Reference: LX774H Rear and Side Jack Panels HDMI IN 1 Connection for HDMI output OPTICAL DIGITAL AUDIO OUT from external device. Use for amps and home theater systems. Note: When the TV is OFF, this port is not enabled. RJP Use Only Connection for Remote Jack Pack (RJP) Control cable.

  • Page 90: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the LX774H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV.

  • Page 91: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 92: Troubleshooting

    If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG representative. 206-4309...

  • Page 93: Commercial Mode Check / Ftg Operation Troubleshooting

    Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU...

  • Page 94: Glossary Of Terms

    Cloning Refers to a particular commercial mode of The process of capturing a Master TV Pro:Idiom operation within an LG TV. See also FTG Setup and transferring it to a Target TV Zenith proprietary security software that Mode. using a USB memory device.

  • Page 95: Document Revision History / Open Source Software Notice 95

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.
  • Page 96 Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric, Smart Share, and the “LG” logo are registered trademarks of LG Electronics Inc. DLNA Certified is a registered trademark of Digital Living Network Alliance. Intel is a registered trademark of Intel Corporation in the U.S.

This manual is also suitable for:

43lx774h49lx774h55lx774h

Table of Contents