Control Panel - Whynter ARC-148M Instruction Manual

CONTROL PANEL

Power Button
Press to turn the air conditioner on and
off
Fan Speed Button
Press to change fan speed
• Controls the 3 fan speeds: HI, MED,
LOW and AUTO. The fan speed indica-
tor lights illuminates to show the set fan
speed. When the AUTO speed is select-
ed, none of the fan speed indicator illu-
minates.
Timer Button
Press to program Timer Delayed
Switch ON or OFF function
Up ( + ) and Down ( - ) Buttons
Adjusts set temperature (1°C/ 2°F incre-
ments) or timer hours (0 – 24 hours).

This unit is capable of displaying set
temperature in Fahrenheit or in Celsius.
To convert from one to the other, press and
hold the Up and Down buttons for 3 sec-
onds.
Sleep Button
Press to activate Sleep mode
Mode Button
Press to change mode
• Controls the 5 function modes:
COOL, AUTO, FAN, DRY, and HEAT.
Swing Button
To adjust the air flow direction
LED Display
• In Cool mode: shows set
temperature in °C or °F and AU-
TO timer setting.
• In DRY and FAN only modes:
shows room temperature.
Error Codes:

E1 - Room temperature sensor error
- Unplug unit and restart in 5 minutes

E2 - Evaporator sensor error
- Unplug unit and restart in 5 minutes

E3 - Condenser sensor error
- Unplug unit and restart in 5 minutes

E4 - Display panel sensor error
- Unplug unit and restart in 5 minutes

P1 - Water reservoir full
- Drain water from the unit
8