Assembly - Char-Broil 463460711 Product Manual

ASSEMBLY

1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
Locking caster
Bottom shelf
Attach side panels to bottom shelf using three 1/4-20x1/2"
2 2
screws, 7mm lock washers, and 7mm flat washers per panel.
IMPORTANT: Panel with large hole must
Be on left side of bottom shelf.
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Right side panel
Fixed caster
1/4-20x1/2" screw
7mm lock washer
7mm flat washer
A
Bent U pin
Left side panel
(with large hole)
17