Instructions To Customer - Panasonic KX-TG6521 Series Operating Instructions Manual

TG6521AL(e).book Page 45 Friday, February 26, 2010 5:07 PM

Instructions to customer

Installation
Install this telephone yourself by simply plugging it into the line socket for any regular
telephone. You may connect it in place of your existing telephone or to any spare
telephone socket installed in your premises.
To disconnect your existing telephone you must first remove its plug from the line
socket. You can then insert the plug of this telephone into the socket and use your
equipment.
If the plug of your existing telephone cannot be readily removed, you will have to
remove the screw securing it. To do this proceed as follows:
1
Loosen screw "A" sufficiently to remove the socket cover. (See Fig. 1.)
2
Remove screw "B" and withdraw the plug. (See Fig. 2.)
3
Replace screw "B". (See Fig. 3.) Ensure that it screws completely into the socket
recess. (If the screw is too long, increase the hole depth or replace the screw
with one 5 mm shorter.)
4
Replace the socket cover and tighten screw "A". (See Fig. 4.)
SOCKET
SCREW "A"
Fig. 1
Fig. 3
If you are satisfied with the operation of your telephone service after plugging in your
cordless telephone, your installation is completed.
You will be unable to connect this cordless telephone if your telephone service
consists only of a wall phone or an old style telephone which is not connected by
means of a modern plug and socket. In such cases a new socket will need to be
installed.
PLUG
TELEPHONE CORD
(
Connect to the PLUG
as shown in Fig. 1.
SCREW
"B"
Useful Information
SCREW
"B"
Fig. 2
)
SCREW "A"
SOCKET
Fig. 4
45