Electro-Voice ETX-12P User Manual page 25

7.
Subwoofer control and monitoring interface
The subwoofer DSP control menu selections are available for the ETX-15SP and ETX-18SP.
Figure 4.13: Subwoofer amplifier panel
1.
2.
3.
4.
5.
6.
See also
•
Electro-Voice
MAINS IN – AC connection is established via an IEC-connector. The IEC-connector is
compatible with locking type power cords (not included).
LCD – DSP control and monitoring interface.
MASTER VOL – Adjusts the sound level.
DSP – Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP menu.
INPUT – Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼ inch TRS or XLR
connectors.
OUTPUT – XLR output sends the input signal to another loudspeaker or subwoofer.
INPUT 1 is linked to OUTPUT 1 and INPUT 2 is linked to OUTPUT 2. The MASTER VOL or
DSP control settings do not affect MIX OUTPUT.
POWER – AC switch for switching the power ON or OFF. The LCD screen lights up when
the POWER is turned ON.
MAINS IN – AC connection is established via an IEC-connector.
DSP controls, page 27
User Manual
en 25
2016.04 | 05 | F.01U.276.083